1 _全金屬高精度主旋翼控制組

_High precision metal main rotor assembly

2_高精度軸承設計穩定控制組

_High precision bearing mixing arms

3_新型升降控制臂組、高鋼性金屬主軸軸承座

_New elevator arm set, high rigidity metal main shaft bearing block

4_金屬機頭罩固定柱

_Metal canopy mounting bolt

5_金屬水平翼固定座組

_Metal stabilizer belt set

6_高精度軸承雙推式尾翼控制組及耐高轉速止推軸承尾旋翼夾座

_Tail rotor assembly with double bearings and heavy duty tail with thrust bearings

7_600D碳纖主旋翼

_600D Carbon fiber blade(Standard equipment)

8_RCE-G600定速器

_RCE-G600 Governor(Standard equipment)

9_二合一降壓器Combo+7.4V 1900mAh/40C

_B6T 2 In 1 Voltage Regulator +7.4V 1900mAh/40C

10_DS610數位伺服器

_DS610 Digital servo(Standard equipment)

11_GP780鎖定式陀螺儀組(780+650)

_GP780 Head lock gyro combo(780+650)

設計特點說明:
1.耐衝擊精緻塑膠機頭罩，以爪鉤式三點固定方式，安裝拆卸更方便。
2.大型競賽直昇機設計理念，靜態、動態飛行皆有高效能表現。
3.螺距行程+-14度擁有卓越3D飛行表現與超強爆發力。
4.大直徑離合器組採特殊安裝方式，平衡佳、震動小，動力傳遞最紮實。
5.前置尾舵伺服器設計，有效防止油煙污染。
6.新型尾舵拉桿機制，構造簡單傳遞順暢。
7.特殊H型切面結構電裝安裝座具有保護作用，搭載電裝相當方便。
8.大容量440cc油箱，可劇烈3D飛行長達10分鐘。
9.主齒輪比為8.5：1，主旋翼安全轉速可達2200rpm。
10.耐高轉速止推軸承尾旋翼夾座設計。
11.新規95mm尾旋翼尾舵反應更犀利，鎖定效果更好。
12.T-REX600 Nitro 頂級版採用高效能尾軸傳動設計。
13.G-10 3K玻纖維側板結構，結構簡單強度高，組裝保養更輕鬆。
14.尾管支撐架皆採用高強度碳纖維材質。
15.高效率輕量化引擎散熱風扇，降低引擎負載與提升散熱效率。
16.啟動與離合器軸隅合處採超規格10mm單向軸承。
17.全配重不含燃料僅3.200g(7lbs)。
18.主油箱造型設計本身具有安定燃料供油效果。
19.新款耐高扭力單向軸承基座結構設計。
20.輕量化高運動性新型平衡翼。
21.新款平衡框設計。
22.新型尾支撐桿座。


建議!
初學者選購，於組裝、調機、飛行時務必委請老手從旁指導，使能讓您的入門飛行，事半功倍!

【亞拓有全項商品,保有"產品責任險",是您最安心的選擇。】

●Features
1.Bump resistance plastic canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-14° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Belt driven tail for incredible 50 sized performance.
13.Rigid frame design that can also handle hard crashes without damage.
14.G-10 3K Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New flybar paddles feature light weight and sports.
21.New flybar control set design.
22.New tail boom supports.

●T-REX 600 Nitro 空機套件組X1
●600D碳纖主旋翼X1組
●GP780鎖定式陀螺儀X1
●DS610數位伺服器X3
●DS620數位伺服器X1
●二合一降壓器ComboX1
●RCE-G600定速器X1

自備遙控及電子設備:
●發射機(七動以上直昇機模式遙控器)
●接收機(七動以上)
●標準伺服器X1
●ALIGN 50引擎X1
●50高效加速管X1組
●螺距規X1
●啟動器X1
●加油器X1
●引擎燃油X1

--T-REX 600 Nitro kits setX1 set
--600D Carbon fiber bladeX1
--DS610 Digital servoX1
--GP780 Head lock gyro comboX1
--2 In 1 voltage regulator comboX1
--RCE-G600 GovernorX1

Radio transmitter and electronic equipment required for assembly:
--Transmitter(7-channel or more, helicopter system)
--Receiver(7-channel or more)
--Standard servoX1
--Align 50 engineX1
--50 MufflerX1
--Pitch gaugeX1
--Super starterX1
--Engine fuelX1
--Fuel pumpX1

_Original : ALING'S Shop