| _功能說明(3G無平衡翼系統) : |
_Instruction(3G Programmable Flybarless System) : |
●3軸陀螺儀無平衡翼系統，可模擬有平衡翼系統的穩定性，更有靈活的3D性能。
●採用S.M.M. Silicon Micro Machine技術感應器,具有極佳的穩定性。
●採用12位元處理器，超高解析度，控制細膩精準。
●具備可升級程式化介面，可透過傳輸線更新軟體（傳輸線另購）。
●設定簡單不需額外的介面，只需五個步驟、兩個感度調整即可完成所有設定，尾舵設定和GP780相同，設定輕鬆上手。
●無平衡翼系統，可大幅降低3D大動作飛行能量消耗，提供直昇機更大的動力輸出且更加節省燃油或電力。
●高感度陀螺感測器及先進環路設計，可提供比一般平衡翼系統更佳的靜態及動態穩定性。
●適用於任何比例之對稱式三伺服器CCPM系統及傳統十字盤系統。
●3G Flybarless電子設備相容迷你型直昇機至大型直昇機
T-REX250～T-REX700。
●創新設計的螺距量測器，藉以模擬有平衡翼系統之螺距量測。
●高頻數位輸出訊號，使伺服器的反應更加精準、迅速。
●適用電壓4.5V～8.4V，支援高電壓伺服器。
●體積小、重量輕，構造簡單可靠，提供操控者高性能的飛行樂趣。 |
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold eparately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 4.5V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design. |
| _功能說明(T-REX 600NFL) : |
_Instruction(T-REX 600NFL) : |
設計特點說明:
1.耐衝擊精緻玻纖機頭罩，以爪鉤式三點固定方式，安裝拆卸更方便。
2.大型競賽直昇機設計理念，靜態、動態飛行皆有高效能表現。
3.螺距行程+-15度擁有卓越3D飛行表現與超強爆發力。
4.大直徑離合器組採特殊安裝方式，平衡佳、震動小，動力傳遞最紮實。
5.前置尾舵伺服器設計，有效防止油煙污染。
6.新型尾舵拉桿機制，構造簡單傳遞順暢。
7.特殊H型切面結構電裝安裝座具有保護作用，搭載電裝相當方便。
8.大容量440cc油箱，可劇烈3D飛行長達10分鐘。
9.主齒輪比為8.5：1，主旋翼安全轉速可達2200rpm。
10.耐高轉速止推軸承尾旋翼夾座設計。
11.新規95mm尾旋翼尾舵反應更犀利，鎖定效果更好。
12.T-REX600 NFL 頂級版採用高效能尾軸傳動設計。
13.碳纖維側板結構，結構簡單強度高，組裝保養更輕鬆。
14.尾管支撐架皆採用高強度碳纖維材質。
15.高效率輕量化引擎散熱風扇，降低引擎負載與提升散熱效率。
16.啟動與離合器軸隅合處採超規格10mm單向軸承。
17.全配重不含燃料僅3100g。
18.主油箱造型設計本身具有安定燃料供油效果。
19.新款耐高扭力單向軸承基座結構設計。
21.新型尾支撐桿座。 |
●Features
1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple andlight weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-15° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Highly efficient shaft driven tail design.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.10Kg.
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New tail boom supports.
|
| _商品規格(3G無平衡翼系統) : |
_Specification(3G Programmable Flybarless System) : |
●適用電壓:DC 4.5~8.4V
●消耗電流:<80mA @ 4.8V
●偵測側滾及前滾角速度:±300度/sec
●偵測尾舵角速度:±500度/sec
●感測器解析度:12位元（12BIT）
●操作溫度:-20℃~65℃
●操作濕度:0%~95%
●符合RoHS限用規章
●尺寸:
控制器:42x26.5x14.5mm
感應器:22.3x21.7x14mm
●重量:
控制器:16g
感應器:9g |
●Suitable Voltage Range:DC 4.5~8.4V
●Current Comsumption:<80mA @ 4.8V>
●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution: 12bit
●Operating temperatur:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension:
Controlbox:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight:
Control box:16g
Sensor:9g
|
| _商品規格(T-REX 600NFL) : |
_Specification(T-REX 600NFL) : |
●機身長:1160mm
●機身高:410mm
●主旋翼長:600mm
●主旋翼直徑:1350mm
●尾旋翼直徑:240mm
●引擎主齒:20T
●尾驅動主齒:180T
●齒輪傳動比:8.5:1:4.5(E:M:T)
●全配重:約3100g |
●Length:1160mm
●Height:410mm
●Main blade length:600mm
●Main rotor diameter:1350mm
●Tail rotor diameter:240mm
●Engine pinion gear:20T
●Autorotation tail drive gear:180T
●Drive gear ratio:8.5:1:4.5(E:M:T)
●Flying weight:Approx. 3100g |
| _商品配件: |
_Accessories: |
●T-REX 600N 3G 空機套件組 X1 (更改機頭罩)
●3G無平衡翼系統 X1組
●600D碳纖主旋翼X1組
●DS610數位伺服器 X3
●DS620數位伺服器 X1
●二合一降壓器Combo X1
●RCE-G600定速器 X1
●ALIGN 50 HYPER ENGINE
●50~55H High Performance Muffler
●600N 彩繪機頭罩/彩繪黃 [HC6008] x 1
自備遙控及電子設備:
●發射機(七動以上直昇機模式遙控器)
●接收機(七動以上)
●標準伺服器 X1 (油門用)
●ALIGN 50引擎 X1
●50高效加速管 X1組
●螺距規 X1
●啟動器 X1
●加油器 X1
●引擎燃油 X1
|
●T-REX 600N 3G kits set X1 (Change the canopy)
●3G Programmable Flybarless System X1
●600D Carbon fiber blade X1
●DS610 Digital servo X3
●DS620 Digital servo X1
●2 In 1 voltage regulator combo X1
●RCE-G600 Governor X1
●ALIGN 50 HYPER ENGINE
●50~55H High Performance Muffler
●600N Painted Canopy/Yellow (HC6008) x 1
Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicoptersystem)
●Receiver(7-channel or more)
●Standard servo X1 ( for throttle)
●Pitch gauge X1
●Super starter X1
●Engine fuel X1
●Fuel pump X1
|
| ● 圖文來源 : 亞拓遙控世界_網路購物網 |
_Original : ALING'S Shop |
