1 _全金屬高精度主旋翼控制組

_All metal, highly precise main blade control system

2_新型可調跨距金屬左右控制搖臂與升降控制臂組

_New lateral adjustable metal left/right control bellcrank arms and elevator control arms

3_新型輕量化H切面電裝固定座，具有保護作用與方便操作設定

_New lightweight H-cross section electronic retention system
for protection, as well as ergonomically correct design to simplify operation for battery protection and easy use

4_上置式馬達座設計，獨特固定式馬達第三軸承座

_Top mounted motor base with unique fixed 3rd bearing block

5_高效能尾軸傳動設計，高精密度軸承雙推式尾翼控制組及耐高轉速止推軸承尾旋翼夾座

_High efficiency shaft tail drive system, high precision bearinged push/pull control system, and high speed rated thrust bearings incorporated into tail blade grips

6_3K側板與電池滑軌一體成型設計，便於拆裝與提供電池最佳保護

_Innovative sliding battery tray rails imbedded into 3K side frame, providing easy battery access and protection

7_拆裝便利上置式ESC固定座，具有極佳散熱環境

_Easy access top mounted ESC platform to take advantage of main blades airflow for effective cooling.(ESC not included

8_700M 高效高扭力無刷馬達

_700M high efficiency, high torque brushless motor

9_690D碳纖主旋翼

_690D carbon main blades

10_DS610數位伺服器ˋCNC加工金屬伺服器舵角片

_DS610 digital servos with CNC aluminum servo horns.)

11_DS650數位伺服器

_DS650 Digital servo

9_3G無平衡翼系統組

_3G Programmable Flybarless System

●3軸陀螺儀無平衡翼系統，可模擬有平衡翼系統的穩定性，更有靈活的3D性能。
●採用S.M.M. Silicon Micro Machine技術感應器,具有極佳的穩定性。
●採用12位元處理器，超高解析度，控制細膩精準。
●具備可升級程式化介面，可透過傳輸線更新軟體（傳輸線另購）。
●設定簡單不需額外的介面，只需五個步驟、兩個感度調整即可完成所有設定，尾舵設定和GP780相同，設定輕鬆上手。
●無平衡翼系統，可大幅降低3D大動作飛行能量消耗，提供直昇機更大的動力輸出且更加節省燃油或電力。
●高感度陀螺感測器及先進環路設計，可提供比一般平衡翼系統更佳的靜態及動態穩定性。
●適用於任何比例之對稱式三伺服器CCPM系統及傳統十字盤系統。
●3G Flybarless電子設備相容迷你型直昇機至大型直昇機
T-REX250～T-REX700。
●創新設計的螺距量測器，藉以模擬有平衡翼系統之螺距量測。
●高頻數位輸出訊號，使伺服器的反應更加精準、迅速。
●適用電壓4.5V～8.4V，支援高電壓伺服器。
●體積小、重量輕，構造簡單可靠，提供操控者高性能的飛行樂趣。

●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold eparately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 4.5V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.

T-REX 700E 3G空機套件組 X1
●3G無平衡翼系統 X1組
●690D碳纖主旋翼 X1組
●DS610數位伺服器 X3
●DS650數位伺服器 X1
●鋁合金尾管 X 1
●3K 碳纖尾管 X 1
●700M 無刷馬達 X 1
●105mm 3K 碳纖尾旋翼 x 1組

自備遙控及電子設備:
●發射機(七動以上直昇機模式遙控器)
●接收機(七動以上)
●ESC電子調速器(12S Li-Po 80A以上)
●5A以上外接式BEC(ESC無內建BEC時使用)
●6S Li-Po 4500 ~ 5200mAh X2
●旋轉式螺距規

●T-REX 700E 3G Kits Set X1
●Aluminum Tail Boom X1
●3K Carbon Fiber Tail Boom X1
●690D Carbon fiber blades X1
●DS610 Digital servoX3 set
●DS650 Digital servo X1
●Flybarless System X1 set
●700M Brushless Motor X1
●105mm 3K Carbon Fiber Tail Blades X1 Set


Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●ESC (12S Li-Po 80A or more)
●5A and higher external BEC(uses when ESC doesn have BEC build in)
●6S Li-Po 4500 ~ 5200mAh X2
●Dial Pitch Gauge

_Original : ALING'S Shop