●3軸陀螺儀無平衡翼系統，可模擬有平衡翼系統的穩定性，更有靈活的3D性能。
●採用S.M.M. Silicon Micro Machine技術感應器,具有極佳的穩定性。
●採用12位元處理器，超高解析度，控制細膩精準。
●具備可升級程式化介面，可透過傳輸線更新軟體（傳輸線另購）。
●設定簡單不需額外的介面，只需五個步驟、兩個感度調整即可完成所有設定，尾舵設定和GP780相同，設定輕鬆上手。
●無平衡翼系統，可大幅降低3D大動作飛行能量消耗，提供直昇機更大的動力輸出且更加節省燃油或電力。
●高感度陀螺感測器及先進環路設計，可提供比一般平衡翼系統更佳的靜態及動態穩定性。
●適用於任何比例之對稱式三伺服器CCPM系統及傳統十字盤系統。
●3G Flybarless電子設備相容迷你型直昇機至大型直昇機
T-REX250～T-REX700。
●創新設計的螺距量測器，藉以模擬有平衡翼系統之螺距量測。
●高頻數位輸出訊號，使伺服器的反應更加精準、迅速。
●適用電壓3V～8.4V，支援高電壓伺服器。
●體積小、重量輕，構造簡單可靠，提供操控者高性能的飛行樂趣。
功能說明(T-REX 550E) :
設計特點說明:
1.全新造型低風阻金屬主旋翼控制組, 擁有極佳的剛性與優異的操控精確度。
2.新型輕量化高精度主齒輪，具有極佳的平衡度與穩定性。
3.新型輕量化金屬主齒中心座。
4.新型輕量化高剛性金屬主軸固定座。
5.十字盤導板與陀螺儀固定座一體成形設計。
6.拆裝便利碳纖維ESC固定座，可選擇安裝於尾管固定座上方，利用主旋翼強大氣流提供ESC極佳散熱環境，亦可安裝於尾伺服器下方,提供多樣化的電裝配置空間。
7.兩段式電池固定座，可依電池重量調整最佳重心位置。
8.3K碳纖維雙側板、碳纖維底板，結構簡單強度高，組裝保養輕鬆。
9.與600直昇機同級ψ21.5mm尾管與尾管固定座,提供尾部極佳的剛性與安定性。
10.全新設計後置機身式尾舵伺服器座，不僅美觀，更可強化側板剛性與保護尾舵伺服器。
11.耐高轉速止推軸承金屬尾旋翼夾座設計。
12. 高效能尾軸傳動設計。
13. 尾翼組、尾管支撐架採用高強度碳纖材質。
14. 新型輕量化腳架。
15. 高級玻纖彩繪機頭罩。
|
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold eparately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
Specification(T-REX 550E) :
1. Newly designed aerodynamically efficient metal main blade control system, with high rigidity and superior control precision.
2. New lightweight high precision main gear, with excellent balance and stability.
3. New lightweight metal main gear hub.
4. New lightweight rigid metal main shaft bearing blocks.
5. Integrated swash anti-rotation guide and gyro mounting platform.
6. Convenient carbon fiber ESC mount for installation either on top of tail boom mount for maximum cooling from main blades, or under rudder servo for maximum flexibility.
7. Dual section battery mount for optimal CG position based on battery weight.
8. 3K carbon fiber side frame and base plate, simple yet highly rigid for ease of maintenance.
9. 600 helicopter grade ψ21.5mm diameter tail boom providing superior rigidity and stability.
10. Newly designed rear mounted rudder servo mount, for pleasing aesthetic as well as improving side frame strength and protection to the rudder servo.
11. High speed rated thrust bearings in tail blade grips.
12. High efficiency torque tube drive.
13. High strength carbon fiber used on tail fins and tail boom supports.
14. New lightweight landing gears.
15. High grade airbrushed fiberglass canopy.
|
●機身長:1042mm
●機身高:374mm
●主旋翼長:520mm
●主旋翼直徑:1188mm
●尾旋翼直徑:254mm
●馬達主齒:16T
●傳動主齒輪:170T
●尾驅動主齒:180T
●尾翼傳動齒:40T
●齒輪傳動比:1:10.62:4.5
●空機重(含馬達):約1970g
●全配重:約2900g |
● Length: 1042mm
● Height: 374mm
● Main Blade Length: 520mm
● Main Rotor Diameter: 1188mm
● Tail Rotor Diameter: 254mm
● Motor Drive Gear:16T
● Main Drive Gear:170T
● Autorotation Tail Drive Gear: 180T
● Tail Drive Gear: 40T
● Drive Gear Ratio: 1:10.62:4.5
● Weight(With Motor): 1970g
● Flying Weight: Approx. 2900g
|
●T-REX 550E空機套件組 X 1
●鋁合金尾管 X 1
●520碳纖主旋翼 X1組
●DS610數位伺服器 X3
●DS620數位伺服器 X1
●GP780 鎖定式陀螺儀 X1
●600M 無刷馬達 X 1
●RCE-BL70G 無刷調速器 x1
●90mm 3K 碳纖尾旋翼 x 1組
|
●T-REX 550E Kits Set X1
●Aluminum Tail Boom X1
●RCE-BL70G Brushless ESC x1
●520 Carbon fiber blades X1
●DS610 Digital servoX3 set
●DS620 Digital servo X1
●GP780 Head Lock Gyro x1
●600M Brushless Motor X1
●90mm 3K Carbon Fiber Tail Blades X1 Set
|
